|
Diamond Fickert for Granite Polishing
Tools
designed for high performance machines of granite and machines
with a head.
Suitable
for grinding and polishing the surface of various kinds of stones
slab in automatic machines. With the feature of good polishing
efficency and very long using life in grinding stone slabs.
|
Code
|
Water Quantity
Needed
|
GRIT
|
Length |
Height |
Life(M2) 20mm
Height for Medium Hard Granite
(Only for Reference) |
|
1
|
Big
|
35/40
|
140mm
or
170mm |
12mm
15mm
20mm |
10000
|
|
2
|
40/50
|
13000
|
|
3
|
50/60
|
17000
|
|
4
|
70/80
|
22000
|
|
5
|
80/100
|
29000
|
|
6
|
100/120
|
37000
|
|
7
|
140/200
|
40000
|
Strongpoint of using diamond brick:
Saving electricity: diamond brick can be used to grind stone
with less power because of its sharpness. This can reduce
the stress of grind head, thereby reduce machine' abrasion
and stone's dilapidation.
High efficiency: using diamond brick can raise the
transmission speed of conveyer belt; thereby improve the
efficiency for its sharpness and abrasion resistance.
High luminosity: using diamond brick can improve stone
luminosity more than 10 degree. For adopting advanced
technology, diamond brick can totally avoid the
unstabilization of brick quality that caused by magnesia
activation reduction and conservation condition's change
during the production. And possibility of causing nick and
unstabilization of luminosity reduce because that the
examination and transportation of diamond production are
more rigorous than that of magnesia production and the
uniformity of diamond granularity is far better than that of
luminosity.
High quality: diamond brick own high quality because
computer controlled production equipment and technics are
used in the production. However, the production of magnesia
is still adopt simple manual work and the production period
would prolong more than one month, these affect the quality
of products.
When place order for granite
polishing diamond Fickert please inform
the following:
Length (mm)
With or without Water Groove?
Segment Height (12, 15,
or 20mm?)
Base Type (Steel or aluminium? If possible
please offer the Base Drawing, otherwise will will make the base according to our standard.)
Grit No.
How many pcs per Head? ( 6 or other No.?)
Quantity NO. (Each Grit
how many pcs? Total how many pcs?)
Machine Type (Made in which country?How
many heads per machine?)
Machine Powder
Slab Feed Speed (M/Minute)
Normal Pressure (How many KGS? or without
pressure)
Expected Polishing Life (How many
SQM for each Grit?)
Expected Shipping Date
Special Requirements
(If)
|
